logo
Αρχική Σελίδα Ειδήσεις

Το εταιρικό blog για Mingjiada Electronics Supply ADI LT8494 And LT8495 Series SEPIC/Boost Converter

Πιστοποίηση
Κίνα ShenZhen Mingjiada Electronics Co.,Ltd. Πιστοποιήσεις
Κίνα ShenZhen Mingjiada Electronics Co.,Ltd. Πιστοποιήσεις
Αναθεωρήσεις πελατών
Στάλη πολύ γρήγορα, και πολύ χρήσιμος, νέος και αρχικός, θα σύστηνε ιδιαίτερα.

—— Νισικαβάα από την Ιαπωνία

Επαγγελματική και γρήγορη υπηρεσία, αποδεκτές τιμές για τα αγαθά. άριστη επικοινωνία, προϊόν όπως αναμενόταν. Συστήνω ιδιαίτερα αυτόν τον προμηθευτή.

—— Λουίς Από τις Ηνωμένες Πολιτείες

Υψηλής ποιότητας και αξιόπιστης απόδοσης: "Τα ηλεκτρονικά εξαρτήματα που λάβαμε από την [ShenZhen Mingjiada Electronics Co., Ltd.] είναι υψηλής ποιότητας και έχουν δείξει αξιόπιστη απόδοση στις συσκευές μας".

—— Ρίτσαρντ από τη Γερμανία

Ανταγωνιστικές τιμές: Οι τιμές που προσφέρονται από είναι πολύ ανταγωνιστικές, καθιστώντας την εξαιρετική επιλογή για τις ανάγκες προμηθειών μας.

—— Τιμ από τη Μαλαισία

Η εξυπηρέτηση πελατών που παρέχονται από είναι εξαιρετική. Είναι πάντα ευαίσθητοι και χρήσιμοι, εξασφαλίζοντας ότι οι ανάγκες μας ικανοποιούνται άμεσα.

—— Βίνσεντ από τη Ρωσία

Μεγάλες τιμές, γρήγορη παράδοση και εξαιρετική εξυπηρέτηση πελατών.

—— Νισικαβάα από την Ιαπωνία

Αξιόπιστα εξαρτήματα, γρήγορη αποστολή και εξαιρετική υποστήριξη.

—— Σαμ Από τις Ηνωμένες Πολιτείες

Υψηλής ποιότητας εξαρτήματα και μια απρόσκοπτη διαδικασία παραγγελίας.

—— Η Λίνα από τη Γερμανία

Είμαι Online Chat Now
επιχείρηση Μπλογκ
Mingjiada Electronics Supply ADI LT8494 And LT8495 Series SEPIC/Boost Converter
τα τελευταία νέα της εταιρείας για Mingjiada Electronics Supply ADI LT8494 And LT8495 Series SEPIC/Boost Converter

Mingjiada Electronics Supply ADI LT8494 And LT8495 Series SEPIC/Boost Converter

 

In applications with a wide input voltage range—such as automotive electronics, industrial control and telecommunications equipment—power supply systems often face challenges such as significant fluctuations in input voltage, cold-start voltage drops and sudden load drops. ADI’s LT8494 | LT8495 series of current-mode, fixed-frequency SEPIC/boost converters feature integrated 2 A, 70 V switches and support a wide input voltage range of 3 V to 60 V, with an output voltage of up to 70 V. A key advantage of the SEPIC topology is its ability to operate with an input voltage that is higher than, lower than, or equal to the output voltage, making it particularly suitable for applications such as automotive electronic control unit (ECU) power supplies, portable device power supplies and industrial power supplies.

 

I. LT8494 – SEPIC/Boost DC/DC Converter with 2 A, 70 V Switch and 7 μA Quiescent Current

The LT8494 is a single-chip switch-mode regulator with adjustable frequency (250 kHz to 1.5 MHz). The quiescent current can be less than 7 μA during device operation and is approximately 0.3 μA when the SWEN pin is low. The LT8494 can be configured as a SEPIC, boost or flyback converter. Its low-ripple Burst Mode® operation maintains high efficiency under low output current conditions and keeps output ripple below 10 mV.

Key Features:

Low-ripple Burst Mode® operation:

7 μA IQ (converting from 12 VIN to 5 VOUT)

Output ripple (typically < 10 mV)

Dual supply pins:

Improved efficiency

Minimum supply voltage reduced to ~1 V after start-up to extend battery life

Wide input voltage range: ~1 V to 60 V (for start-up from 2.5 V to 32 V)

Power Good (PG) circuit operates with input supply as low as 1.3 V

Resistant to FMEA faults in TSSOP packaging

Fixed-frequency PWM, SEPIC / boost / flyback topologies

NPN power switch: 2A/70V

Programmable switching frequency: 250kHz to 1.5MHz

Undervoltage lockout (UVLO) can be programmed on the SWEN pin

Soft-start can be programmed using a single capacitor

 

II. LT8495 – SEPIC/Boost Converter with 2A, 70V Switching Capability, 9μA Quiescent Current, Power-On Reset (POR) and Watchdog Timer

The LT8495 is a monolithic switch-mode regulator with adjustable frequency (250kHz to 1.5MHz), featuring power-on reset and a watchdog timer. The quiescent current can be less than 9 μA whilst the device is operating, and is approximately 0.3 μA when the SWEN, WDE and RSTIN pins are at a low level. The device can be configured as a SEPIC, boost or flyback converter; its low-ripple Burst Mode® operation maintains high efficiency under low output current conditions and keeps output ripple below 10 mV.

Key Features:

Wide input voltage range: ~1 V to 60 V (for start-up: 2.5 V to 32 V)

Low-ripple Burst Mode® operation

9 μA IQ (during conversion from 12 VIN to 5.0 VOUT)

Output ripple (typically <10 mV)

Dual power supply pins

Improved efficiency

Minimum supply voltage reduced to ~1 V after start-up to extend battery life

Integrated 2 A/70 V power switch

Programmable watchdog timer capable of operating when the VIN supply is removed

Programmable power-on reset (POR) timer capable of performing the RST function when the input supply is as low as 1.3 V

Resistant to FMEA faults in TSSOP packaging

Fixed-frequency PWM, SEPIC / boost / flyback topologies

Programmable switching frequency: 250 kHz to 1.5 MHz

Undervoltage lockout (UVLO) can be programmed on the SWEN and RSTIN pins

Soft-start can be programmed using a single capacitor

 

Supply Information

Shenzhen Mingjiada Electronics Co., Ltd. — a long-standing distributor of the ADI/Linear product range — maintains a regular stock of LT8494 | LT8495 series SEPIC and boost converters, including but not limited to the following:

LT8494EFE

LT8494EUF

LT8494HFE

LT8494IFE

LT8494IUF

LT8495EFE

LT8495EUF

LT8495HFE

LT8495IFE

LT8495IUF

 

Mingjiada Electronics supports sample orders, small-batch purchases and full-reel supply. To confirm specific part numbers, stock levels and real-time prices, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for further supply details.

Χρόνος μπαρ : 2026-11-06 10:58:06 >> κατάλογος ειδήσεων
Στοιχεία επικοινωνίας
ShenZhen Mingjiada Electronics Co.,Ltd.

Υπεύθυνος Επικοινωνίας: Mr. Sales Manager

Τηλ.:: 86-13410018555

Φαξ: 86-0755-83957753

Στείλετε το ερώτημά σας απευθείας σε εμάς (0 / 3000)