Το εταιρικό blog για Mingjiada Supply TI PGA2505EVMV2 Evaluation Module, For Evaluating The Performance And Characteristics Of The PGA2505 Product

Mingjiada Supply TI PGA2505EVMV2 Evaluation Module, For Evaluating The Performance And Characteristics Of The PGA2505 Product

Shenzhen Mingjiada Electronics Co., Ltd. — Long-term supply of [TI] evaluation module PGA2505EVMV2: Digital-controlled microphone preamplifier evaluation module with USB interface. Product details for PGA2505EVMV2 are as follows:

Product Model: PGA2505EVMV2
Series: SoundPlus™
Type: Audio
Function: Microphone preamplifier
Embedded: Yes, MCU, 16-bit
IC/Component Used: PGA2505
PGA2505EVMV2 Product Image:

PGA2505EVMV2 Evaluation Module (EVM) provides a convenient platform for assessing the performance and characteristics of the PGA2505 product. The PGA2505 is a digitally controlled microphone preamplifier with a USB interface. This programmable gain amplifier can be configured to pass signals at unity gain or apply 9dB to 60dB of gain (in 3dB steps) to the input signal. Gain and support functions are controlled via the MSP430F5529 microcontroller and the PGA2505EVMV2 graphical user interface (GUI).

Products supported by the PGA2505EVMV2:
Dedicated Audio Amplifiers
PGA2505 — Gain Range: 0dB and 9dB to 60dB (3dB steps)
Features:
Fully differential input-to-output architecture
Digital gain control via SPI™:
Gain range: 9dB to 60dB, 3dB per step
Unit gain (0dB) configurable via serial port
Dynamic performance:
Equivalent input noise (ZS=150Ω, gain=30dB): -123dBu
Total harmonic distortion plus noise (THD+N, gain=30dB): 0.0006%
Zero-crossing detection technology minimises audible ghosting during gain switching
Integrated DC servo circuit effectively suppresses output bias voltage
Common-mode servo circuit significantly enhances common-mode rejection ratio (CMRR)
Four-wire serial control interface features:
Easily connects to microprocessor or DSP serial port
Supports daisy-chain connection of PGA2505 devices
Over-range output pin provides clipping indication
Four general-purpose digital output pins
±5V power supply operation
Available in SSOP-24 package

PGA2505EVMV2 Features:
Accepts XLR or TRS balanced input connections
Configurable front-end circuit options for prototyping pads and filters
Designed for evaluating the PGA2505 microphone preamplifier
XLR and TRS balanced outputs with flexible output load options
LED indicators for GPO and over-range output
Common-mode voltage input (VCOMIN) pin
Includes application software, compatible with PCs featuring built-in USB ports
Requires +5V and -5V analogue power supplies plus +5V digital power supply
If using MSP-EXP430F5529LP, do not connect +5V digital power supply (VCC)

Mingjiada Electronics maintains long-term supply of the [TI] evaluation module (PGA2505EVMV2) for assessing the performance and characteristics of the digitally controlled microphone preamplifier PGA2505. For further product information regarding the PGA2505EVMV2 or to enquire about samples, please visit the Mingjiada Electronics official website (https://www.integrated-ic.com/) for additional supply details.