Το εταιρικό blog για Supply and Procurement of the ADXL345 Three-Axis Digital Accelerometer – A High-Performance MEMS Motion Sensor Designed Specifically for Drones

Shenzhen Mingjiada Electronics Co., Ltd. has long specialised in the supply and recycling of high-performance electronic components. We are now supplying and purchasing the ADXL345 three-axis digital accelerometer for customers worldwide—a classic MEMS motion sensor developed by Analog Devices (ADI) that is widely used in critical applications such as drone flight control, attitude reference systems and vibration monitoring.

I. ADXL345: A Three-Axis Accelerometer Designed for UAV Flight Control

The ADXL345 is a small, thin, ultra-low-power three-axis digital accelerometer housed in a compact 3mm × 5mm × 1mm LGA package, making it ideal for UAV platforms where weight and space are critical considerations. Its key specifications include:

Measurement range: Selectable ±2g, ±4g, ±8g or ±16g, offering flexible adaptation to different flight conditions;

High resolution: Up to 13-bit resolution, maintaining a scaling factor of 4 mg/LSB across the entire g range;

Digital output: 16-bit two’s complement format, accessed via I²C or SPI (3-wire/4-wire) digital interfaces;

Ultra-low power consumption: as low as 23 µA in measurement mode and just 0.1 µA in standby mode;

Wide operating temperature range: −40°C to +85°C, suitable for harsh outdoor flight environments;

High shock resistance: 10,000g shock resistance, easily withstanding drone take-offs, landings and accidental impacts.

Thanks to these features, the ADXL345 not only measures static gravitational acceleration to support tilt sensing, but also accurately captures dynamic acceleration changes caused by motion or impact, making it an ideal choice for realising drone attitude control and condition monitoring.

II. Typical Applications of the ADXL345 in the Drone Sector

Drone flight control systems require real-time acquisition of the aircraft’s attitude angles (pitch, roll and yaw) and motion status. Thanks to its high resolution and low noise, the ADXL345 performs particularly well in the following scenarios:

1. Flight Controller Attitude Estimation and Stabilisation Control

The three-axis acceleration data provided by the ADXL345 can be fused with data from sensors such as gyroscopes (e.g. the ITG3200). Through algorithmic calculations, the drone’s attitude angles are determined, helping the flight control system maintain stable flight. In open-source drone systems such as Paparazzi, the ADXL345 has been widely integrated into IMU (Inertial Measurement Unit) modules.

2. Vibration monitoring and propeller fault detection

Drones are subject to varying degrees of airframe vibration during flight. Research indicates that the ADXL345 can be used to collect drone vibration data in real time and, through classification models, effectively distinguish between healthy propellers and those with various faults. Its training accuracy rate of over 93 per cent fully demonstrates its viability in low-cost, highly reliable vibration monitoring solutions.

3. Auxiliary Navigation in Low-Visibility Environments

Under low-visibility conditions such as dense fog or smoke, data fusion between the ADXL345 and sensors such as LIDAR can assist the drone in maintaining its navigation capabilities during critical flight conditions, significantly enhancing the margin of flight safety.

III. Mingjiada: One-Stop Supply and High-Value Buyback Services for the ADXL345

As a professional service provider with over 20 years’ experience in the electronic components industry, Mingjiada has accumulated extensive supply chain resources and industry expertise in the sensor sector. For the ADXL345 and the full range of ADI MEMS accelerometers, Mingjiada offers two core services:

✅ Stable Supply

Mingjiada maintains a long-term stock of genuine, original ADXL345 components, whilst also covering popular ADI accelerometer models such as the ADXL366, ADXL380 and ADXL350, providing one-stop procurement support for customers involved in drone R&D, production and maintenance.

✅ High-Priced Buy-Back

Mingjiada offers a long-term, high-priced buy-back service worldwide for drone-specific accelerometers and IMU sensors, covering leading international brands such as ADI (Analog Devices), Bosch and ST (STMicroelectronics), including popular series such as ADXL, BMI and LIS. Whether it is single-axis or three-axis low-power devices (such as the ADXL345 and ADXL355), or tactical-grade IMUs with integrated accelerometers (such as the ADIS16470 and ADIS16475), Mingjiada can provide highly competitive buy-back quotes.

IV. Why Choose Mingjiada?

Guarantee of Genuine Products: All supplied components are genuine factory products with traceable origins;

Professional Evaluation System: Precise testing and valuation of recycled materials to ensure fair transactions;

Flexible Cooperation Models: Support for small-batch trial samples, large-volume procurement and comprehensive inventory management;

Global Service Network: Rapid response for domestic and international drone manufacturers, solution providers and R&D teams.

V. Contact Mingjiada

If you are seeking a stable supply channel for the ADXL345 three-axis digital accelerometer, or wish to realise the value of your idle stock at a high price, please feel free to contact Shenzhen Mingjiada Electronics Co., Ltd. at any time.

Contact Details

Tel: +86 13410018555

Email: sales@hkmjd.com

Tags: ADXL345BCCZ, ADXL345BCC, ADXL345BC, ADXL345B, ADXL345