Shenzhen Mingjiada Electronics Co., Ltd. supplies the TI UCC5350 single-channel isolated gate driver, available with Miller clamping or discrete outputs.
I. UCC5350 Product Description
The UCC5350 is a single-channel isolated gate driver from TI’s UCC53x0 family. Designed for gate drive applications in power semiconductors, it can drive MOSFETs, IGBTs, SiC MOSFETs and GaN FETs (using the GaN-optimised variant, the UCC5350SBD). The device provides electrical isolation between the input logic side and the output power side, ensuring that the control circuit and the high-voltage main power circuit are electrically decoupled. It is suitable for circuit configurations requiring high-to-low voltage isolation, such as bridge topologies, half-bridge, full-bridge and push-pull converters.
Within the family, two product lines are distinguished based on their output architecture: Versions with a source Miller clamp are identified by the suffix ‘M’ (e.g. UCC5350MC); the gate of the power transistor is connected to the internal clamping FET via the CLAMP pin. Versions with discrete outputs are identified by the suffix ‘S’ (e.g. UCC5350SB); the two independent pins, OUTH and OUTL, handle the source and sink current paths respectively. In addition, the family offers an ‘E’ version, whose output-side under-voltage lockout (UVLO2) is referenced to the output ground (GND2), providing a more accurate under-voltage reading. The automotive-grade variant, UCC5350-Q1, is designed for automotive electronics applications.
II. Core Electrical Specifications of the UCC5350
The UCC5350 typically delivers peak output pull-up and pull-down currents of 10 A each; the Q1 version guarantees a minimum peak capability of 5 A pull-up and 5 A pull-down, sufficient to rapidly charge and discharge the gate capacitance of power transistors over short periods. The output supply voltage range is 9.5 V to 33 V, allowing flexible configuration in either traditional bipolar drive schemes (using positive and negative power supplies in conjunction with gate resistors and diode networks) or single-supply configurations with negative-voltage shutdown; the input supply voltage range is 3 V to 15 V, with input logic thresholds at CMOS levels, facilitating direct interfacing with PWM outputs from MCUs, DSPs or FPGAs.
Typical propagation delay is approximately 65 ns; rise and fall times under a 1 nF load are typically in the order of 10 ns and 22 ns, respectively. The channel delay exhibits good symmetry, meeting the timing consistency requirements of high-frequency switching power supplies, motor frequency conversion and wide bandgap devices. The device’s operating temperature range is from –40°C to 125°C, covering the typical temperature ranges for industrial and automotive powertrain applications.
Isolation specifications vary by package type: the 4 mm wide-body SOIC-8 (D package) supports 3 kV rms isolation voltage, whilst the 8.5 mm SOIC-8 (DWV package) supports 5 kV rms isolation voltage; corresponding to operating isolation voltages and transient isolation withstand voltages of approximately 850 Vrms / 1,500 Vrms and 4,242 Vpk / 7,071 Vpk respectively, with isolation levels covering both basic and reinforced insulation.
![]()
III. Advantages of Shenzhen Mingjiada Electronics’ Component Supply
Shenzhen Mingjiada Electronics specialises in the global distribution of electronic components, covering numerous leading brands across categories including analogue signal chains, power management, MCUs, RF components, memory and power semiconductors. We provide a stable supply of electronic components and supporting materials, offering one-stop BOM support services for customers engaged in R&D prototyping, small-batch trial production and long-term mass production.
Firstly, the advantage of genuine products and quality control. Components are sourced through official authorised channels, with traceable batch numbers and accompanied by original manufacturer documentation, datasheets and compliance reports. Relying on the ISO quality management system, we carry out visual, silkscreen and packaging inspections upon receipt into stock, with focused spot checks on precision analogue ICs, automotive-grade and industrial-grade components to mitigate the risks associated with refurbished or loose new components.
Secondly, we offer the advantages of global warehousing and rapid delivery. Our dual warehouses in Shenzhen and Hong Kong operate in tandem, maintaining a vast stock of SKUs in stock. We support sample orders starting from a single unit, whilst also handling large-volume, long-term orders; urgent orders can be dispatched within 4 hours, standard orders within 48 hours. Domestic logistics ensure swift delivery, whilst overseas orders are fulfilled via our Hong Kong bonded warehouse to facilitate cross-border delivery, alleviating project deadlines and resolving issues with stock shortages and supply disruptions.
Thirdly, the advantages of one-stop BOM support and technical coordination. Customers may submit a complete BOM list, which our team will uniformly price and source to ensure a complete set of components, thereby reducing the costs associated with liaising with multiple suppliers. We also support long-term price-lock agreements and tiered pricing, helping to stabilise costs for mass-production projects and hedge against fluctuations in the chip market.
Fourth, flexible business models. In addition to supplying brand-new, original off-the-shelf components, we also offer a component recycling service. By distinguishing between different brand product lines, we cater to both clients’ needs to liquidate idle stock and procure new products, thereby providing a dual-service approach covering both procurement and inventory disposal.
IV. Mingjiada Electronic Components Procurement Service Process
1. Submission of Requirements: The customer provides part numbers, packaging types, quantities, batch requirements, a Bill of Materials (BOM) list and delivery lead time requirements, whilst specifying whether the order is for sample testing, trial production or mass production.
2. Quotation and Stock Verification: The sales team conducts real-time checks on spot stock levels and manufacturer production schedules, distinguishing between spot and forward orders, and provides information on pricing, delivery lead times, packaging formats and minimum order quantities, whilst simultaneously supplying datasheets and component parameter documentation.
3. Order Confirmation: Both parties confirm the price, delivery time, quality terms and payment terms, and sign the order. For special requirements (such as automotive-grade or high-reliability components), inspection requirements are agreed upon at the same time.
4. Inbound Inspection and Complete Kitting: The warehouse verifies the material batches and packaging, with particular attention paid to precision ICs; orders with multiple model numbers in the BOM are kitted and packed together.
5. Dispatch and Logistics Tracking: Goods are dispatched according to the agreed schedule; tracking numbers are provided. Domestic and cross-border orders are arranged via the appropriate logistics channels; urgent orders are prioritised via express delivery.
6. After-Sales Technical Support: Should any queries arise regarding component parameters, substitutions or soldering applications upon receipt of goods, customers may consult our technical staff; any quality issues with components will be verified and resolved in accordance with our after-sales procedures.
Υπεύθυνος Επικοινωνίας: Mr. Sales Manager
Τηλ.:: 86-13410018555
Φαξ: 86-0755-83957753